Birthday Party!!!
Want an activity with a difference for your Child’s next
Birthday Party ?
Then CRAFTPOWER is for you!
We will travel to your place.
A woodworking birthday party lasts for around 1.5 hours. The price includes the cost of the travel expenses, instructions, wood, nails, glue and other materials. Also we will make a nice wooden present for your child.
The prices start from $250 to $320. If you choose models that require extra wheels, motors, or other parts, these will incur an additional cost.
This price covers a group of up to 15 children. Additional children: $10 p/ child.
We provide all the necessary woodwork tables, models, tools, wood and associated materials.
Not only will children be occupied – but they will also produce a piece of creative work.
Events are conducted only in Melbourne and state Victoria
|
|
|
All you need is an area at least 8x8 m in the front or backyard of your house; or even a shed or an empty garage.
We recommend the following models for your party. (No extra electronic kits or mechanisms requiered):
1. Kinder - Gr.2 ( 4-7 year old):
|
Animals |
Buildings |
|
Aeroplanes |
Cars |
|
Funny Houses |
Funny Monsters |
If you would like Preps – Gr.2 children to use saws, a ratio of 1 parent/helper to every 4 children is required.
Children select pre-cut templates and through using hammers, pliers, sandpaper, glue and nails will construct take-home models.
2. Gr.3/4 ( 8- 10 year old ):
|
Windmills |
Rockets |
|
Castles |
3-D Aeroplanes |
|
Bridges |
Robots |
|
Cars |
Birdhouses |
3. Gr.5/6 ( 11 - 12 year old) :
|
Biplanes / Helicopters |
Aeroplanes |
|
Robots |
Cranes |
|
Footy |
Tool Box |
Advanced Toys - extra kits required!
Adults supervision is required for all advanced projects!
These workshops also allow for inclusion of clock mechanisms, motors, wheels, solar cells and flashing lights if desired.
|
3D Cars |
Tornado |
|
Building Cranes |
Train |
Mini Billy Carts |
|
Clocks |
Aeroplanes |
Toys with Flashing LEDs |
|
Formula-1 |
Catapults |
Cost of extra kits p/child:
| KITS | PRICE |
|---|---|
| 4 wheel kit (4 wheels, guide tubes, metal axles) | $4.00 |
| 6 wheel kit (6 wheels, guide tubes, metal axles) | $6.00 |
| Motor kit (3 volt motor, battery holder with switch, 2AA batteries, 4 wheels, guide tubes, metal axles, gears) | $5.00 |
| Flashing LEDs kit (2 flashing LEDs, switch, battery holder, 2AA batteries, wire) | $4.50 |
| Solar Kit (Solar cell, 4.5 volt solar motor, propeller, wire) | $5.00 |
| Clock Movement (Clock movement, mounting nut, rubber gasket, brass washer, hour, minute, second hands, numerals, 1AA battery) | $5.00 |
FREQUENTLY ASKED QUESTIONS
Q. What will Craftpower provide?
A. All the necessary woodwork workbenches, tools, wood and associated materials
A selection of different projects to suit all age ranges and levels of experience
A woodworking birthday party lasts for 1.5 hours.
The price includes the cost of the travel expenses, instructions, wood, nails, glue and other materials.
Also we will make a nice wooden present for your child.
Set up time: 30 minutes, so we need to arrive at your place earlier.
Q. What will you need to provide?
A. Free parking with easy & close access for the van to unload the equipment.
Location: All you need is an area at least 8x8 m or bigger in the front or backyard of your house; or even a shed or an empty garage..
1-2 room or trestle tables for displays.
Adequate adult supervision.
The best time to start your party is between 10.00 and 11.00am when the kids are still fresh and active.
Q. How much does it cost?
A. Please write to us and provide your address with the postal code, amd let us know what you would like to make. We will inform you of the cost fore your area.
The prices start from $250 to $320 depends on the area. This price covers a group of up to 15 children.
Additional children: $10 p/ child.
Q. Can we pay with the credit card?
A. No. Payment method is cash or via PayID.
Q. What is the best location for the workshops to be held?
A. The best location is under covered area with easy vehicle access.
Q. Can we make models from different themes during the same session?
A. No. Different models require different stencils and instruments. It is too difficult to make different models in one session, especially with younger children.
Children select pre-cut templates and through using hammers, pliers, sandpaper, glue and nails will construct take-home models.
Q. When will the children paint their models?
A. There is not enough time in the session for children to paint, this will be done at home.
Q. Can we run a workshop that requires saws?
A. If you would like kids to use saws, a ratio of 1 parent / helper to every 4 children is preferred.
Q. Will Craftpower provide food and drinks?
A. No. Craftpower does not provide any food or drinks.
Q. When will children have their food?
A. If the party starts at 10.00 am and it last for 1.5 hours , so you can invite your guests to the birthday table straight after 11.30 am. But we can stop the workshop for a short 3-5 minutes break, so kids can have some drinks.
Q. Are the workshops safe for children?
A. Yes. The instructor explains safety rules prior to session again.
All children wear safety goggles for eye protection.
Junior tools are used which are age appropriate.
Workshops are totally safe if all tools are used in the manner they are supposed to.
The highest level of discipline and control is required.
As this is hands-on activity, we expect your assistance at all times.
We must stress that additional parents are organized to help supervise children with challenging behaviour and special needs.
Please make every effort to ensure a successful workshop with a high standard of supervision.
For further details contact Anatoli or Inna: craftpower.as@gmail.com